I replaced my serpentine belt 2 times this year and it keeps braking. What could be the issue?
Drago V Answered question December 7, 2023
If your serpentine belt keeps breaking or failing frequently, it’s usually indicative of another underlying issue with the belt drive system. Here are some common reasons why a serpentine belt may fail repeatedly:
- Pulley Misalignment: The pulleys that the serpentine belt rides on must be perfectly aligned. Misaligned pulleys can cause excessive wear on the belt, leading to premature failure.
- Defective Tensioner: A faulty belt tensioner can either apply too much or too little tension on the belt. Excessive tension can lead to the belt snapping, while insufficient tension can cause slippage and fraying.
- Worn Pulleys: Over time, the pulley surfaces can wear down, become glazed, or develop sharp edges, which can eat into the belt.
- Damaged Accessories: A failing accessory driven by the belt, such as the alternator, power steering pump, or AC compressor, may place excessive load on the belt or seize, causing the belt to snap.
- Improper Belt Installation: If the belt is not routed correctly around the pulleys or if it’s twisted during installation, it could lead to premature failure.
- Incorrect Belt Size: Using a belt that is either too long or too short for the vehicle’s application can lead to excess tension or slack, respectively, both of which can cause belt failure.
- Oil or Coolant Leaks: Exposure to engine oil, coolant, or other fluids can rapidly degrade the rubber compound of the belt, leading to reduced lifespan and potential breakage.
- Debris: Occasionally, debris can get caught in the belt drive system and damage the belt.
- Harsh Environmental Conditions: Extreme temperatures and environmental conditions can shorten the life of a serpentine belt.
- Old or Wrong Type of Belt: A belt made from cheap or incorrect materials may not be durable enough for your vehicle’s needs.
To resolve the issue:
- Inspect Pulleys and Tensioner: Check for signs of wear, misalignment, and smooth operation of the tensioner pulley. Replace any pulleys or the tensioner if they show signs of malfunction.
- Check for Leaks: If there are oil or coolant leaks, have them repaired promptly.
- Inspect Accessory Components: Evaluate the condition of all belt-driven components to ensure they are in good working order and not placing undue stress on the belt.
- Use a Quality Belt: Always use a high-quality belt that matches the specifications for your vehicle.
- Proper Installation: Ensure that the belt is installed correctly and routed around the pulleys as outlined by the manufacturer’s routing diagram, which is often located under the hood or within the owner’s manual.
If you’re unable to diagnose the issue yourself, it’s advisable to have a certified mechanic look at your vehicle’s serpentine belt system to find and fix the cause of the recurring failures.
Drago V Answered question December 7, 2023