Where to put anti-rattle clips on brake pads?

The anti-rattle clips are strategically placed between the caliper bracket and the brake pad.

Also, the primary purpose of the anti-rattling clips is as follows:

  • Stop Rattling Noise
  • Stop the Squealing Noise of Rotors
  • Get Better Gas Mileage
  • Assist in providing a Samore for an Effective Braking System
  • Enhance the Longevity of Brake Pads
  • Assist in providing a quiet braking experience

Therefore, if you do not install anti-rattle clips when you install new brake pads, you normally do not get the full benefits of a better, safer, and less costly driving experience.

Is it hard to install anti-rattle clips on brake pads?

The process of installing anti-ratting clips is considered to be routine for the professionally certified brake technician. This is because it is a relatively simple job to perform if you know exactly how to position them correctly. However, if you have never installed anti-rattle clips before, it may not be as easy.

Either way, there are sites online that can help walk newbies through the steps. For example, here are anti-rattle clip installation instructions that you may want to follow.

How To Install Anti-Rattle Clip on Brake Pads

Tools List:

  • Socket Wrench
  • Flathead Screwdriver
  • Step 1: Using the socket wrench referenced in the tools list provided above, you will need to loosen the nuts and then carefully remove the brake caliper from its mounting point.
  • Step 2: Turn the brake caliper over, and then remove the brake pad retaining pins with the flathead screwdriver.
  • Step 3: Remove the old brake pad from the brake caliper and then discard it.
  • Step 4: Put the anti-rattle clip between the new brake pads. Then, carefully position the holes on the brake pads’ metal backing plate with the anti-rattle clip loops. st
  • Step 5: Press the brake caliper pistons into the caliper housing with the flathead screwdriver.
  • Step 6: After completing the previous step, slide the anti-rattle clip and the brake pads into the caliper.
  • Step 7: Position the holes in the brake caliper with the holes in the brake pads’ metal plate backing.
  • Step 8: Then, check to make sure that both the brake pad holes and the anti-rattle clips are parallel. Put the retaining pins through the brake pads, caliper, and anti-rattle clips. Use your flathead screwdriver to tighten up each retaining pin.
  • Step 9: Place the brake caliper back on the vehicle and ensure the caliper bolts are tightened securely.

Are anti-rattle clips necessary?

As referenced above, the anti-rattle clips are not only essential to keep the car from making annoying noises. There are other reasons why anti-rattle clips are installed when your new brakes are needed.

One of the most important is helping to extend the life of the brake pads by eliminating problems like excessive wear and tear. For instance, when these clips are installed, they can help do the following:

  • Prevent the brake pad parts from binding,
  • It helps with making the brake’s functions work smoothly with ease
  • No annoying squealing to deal with when the driver is applying brakes at stop signs.

How much does this operation cost?

The cost of installing anti-rattle clips can vary based on different factors, including the cost of changing the brake pads on your vehicle. Since the anti-rattle clips are replaced with a change in new brake pads, the average price is around $150 per axle.

However, if the person that puts on the pads does not install the anti-rattle clips at the same time, the cost will be a lot lower. For instance, if the owner of the vehicle does this work themselves, they may pay around $6 to $15 per axle since the labor will be free.


Anti-rattling clip installations are not a luxury but a necessity for several different reasons. Some of the more common include preventing loud annoying brake noises and reducing excessive wear and tear of the vehicle’s brake pads.

As you can see, there are many great benefits to making sure anti-ratting clips are installed properly every time. Therefore, it is important that every car owner is familiar with the purpose of the anti-ratting clip and their overall benefits.

Scroll to Top